EtherNet/IP to Modbus Master/Slave Gateway 5201/5202-DFNT-MCM(4)The DFNT-MCM modules are the ideal solution for the many applications where EtherNet/IP connectivity can be used to integrate Modbus serial devices into a system. The EtherNet/IP gateway is a powerful module designed with both Client and Server support, enabling easy connection to Rockwell Automation PLCs (CLX, SLC, PLC, CPLX, and similar devices). In combination with the Modbus device support, the module provides a very powerful interface to the many Modbus devices which are in use in the industrial marketplace today. Applications for the module are found in most industries, especially Manufacturing, Oil and Gas, Electrical Power and Food Processing.
EtherNet/IP Client Specifications Polling of command list User configurable polling of commands, including disabled, continuous and on change of data (write only). Modbus Master/Slave The Modbus driver provides extensive support for both the Master and the Slave implementations of the protocol. The serial port(s) on the gateway can be individually configured to support the Modbus protocol (Master or Slave, RTU or ASCII, Baud rate, etc.). General Parameters – Modbus Protocol Communication parameters Baud Rate: 110 to 115K baud Stop Bits: 1 or 2 Data Size: 7 or 8 bits Parity: None, Even, Odd RTS Timing delays: 0 to 65535 ms Error Checking RTU mode (binary) with CRC-16 ASCII mode with LRC error checking Floating Point Floating point data movement supported, including configurable support for Enron implementation Function Codes 1: Read Output Status 2: Read Input Status 3: Read Multiple Data Registers 4: Read Input Registers 5: Write Single Bit 6: Write Single Data Register 15: Write Multiple Bits 16: Write Multiple Data Register Modbus Master Command List Up to 100 command per master port, each fully configurable for function, slave address, register to/from addressing and word/bit count. Polling of command list Configurable polling of command list, including continuous and on change of data, and dynamically user or automatic enabled. Modbus Slave Node address 1 to 247 – software selectable
General Specifications The ProLinx Communication Modules provide connectivity for two or more dissimilar network types. The modules, encased in sturdy extruded aluminum, are stand-alone DIN-rail mounted protocol gateways, providing communication between many of the most widely used protocols in industrial automation today. Hardware Specifications Specification Description Power Supply 24 VDC nominal 18 to 36 VDC allowed Positive, Negative, GND Terminals 2.5 mm screwdriver blade Current Load 500 mA max@ 24 VDC Operating Temperature –20 to 50°C (–4 to 122°F) Storage Temperature –40 to 85°C (–40 to 185°F) Relative Humidity 5 to 95% (non-condensing) Specification Description Dimensions Standard: 5.20H x 2.07W x 4.52D in. (13.2cmH x 5.25cmW x 11.48cmD) Extended: 5.20H x 2.73W x 4.52D in. (13.2cmH x 6.934cmW x 11.48cmD) LED Indicators Power and Module Status Application Status Serial Port Activity LED Serial Activity and Error LED Status Configuration Serial Port DB-9M RS-232 only No hardware handshaking Ethernet Port (Ethernet modules only) RJ45 Connector Link and Activity LED indicators Application Serial Ports RS-232/422/485 RS-232 handshaking configurable RS-422/485 screw termination included Serial Port Isolation 2500V RMS port signal isolation per UL 1577 3000V DC min. port to ground and port to logic power isolation Shipped with Each Unit Mini-DIN to DB-9M serial cables 4 ft RS-232 configuration cable 2.5mm screwdriver CD (docs and Configuration utility) RS-422/485 DB-9 to Screw Terminal Adaptor (1 or 4, depending on ports) ProSoft Configuration Builder ProSoft Configuration Builder (PCB) provides a quick and easy way to manage module configuration files customized to meet your application needs. PCB is not only a powerful solution for new configuration files, but also allows you to import information from previously installed (known working) configurations to new projects. Additional Products ProSoft Technology offers a full complement of hardware and software solutions for a wide variety of industrial communication platforms. Visit our web site at http://www.prosoft-technology.com for a complete list of products. Ordering Information To order this product, please use the following: 5201-DFNT-MCM 5202-DFNT-MCM4EtherNet/IP to Modbus Master/Slave Gateway To place an order, please contact your local ProSoft Technology distributor. For a list of ProSoft distributors near you, go to http://www.prosoft-technology.com Distributors: Place your order by email or fax to: North American / Latin American / Asia Pacific
Untuk Permintaan Penawaran Harga & Stock Silahkan Hubungi Team'S Sales kami Dibawah ini :
Marketing :
1. Yadi.
Mobile : + 62-81297691617
Phone : 021 – 80808849 Ext.208
2. Ahmad Sudarman.
Mobile : + 62-81282819147
Phone : 021 – 80808849 Ext.209
PT. TOTAL ABADI SOLUSINDO
Authorized Distributor & Energy Management Contractor
Jl.Dr.Krt Radjiman Widyodiningrat Ruko D'Arcade Blok A19
D’Mansion Jatinegara Indah Central Bussiness Park, Pulo Jahe, Cakung , Jakarta Timur 13930
Phone : +62-21-80808849 |Fax. +62-21-80808848
Email : info@totalabadisolusindo.co.id
Email : sales@totalabadisolusindo.co.id
Web : www.totalabadisolusindo.com
SUPPORT ALL BRAND & ALL MANUFACTURE :
|INVERTER|PLC|HMI|SOFT STARTER|AC SERVO|SENSOR & CONTROLLER|POWER SUPPLY|CIRCUIT BREAKER & CONNECTOR|TACHOMETER|FILTER|BATTERY CHARGER|
|ENCODER & COUNTER|SCALE & INDICATOR||FLOW METER|TESTER|WATER METER|SIGNAL LAMP|SAFETY RELAY|LOADCELL|FAN & BLOWER|INSTRUMENTS|GENSET|
|MODULE|VALVE|PUMP|PNEUMATIC & HYDRAULIC|PRESSURE TRANSMITTER|CLUTCH & BRAKE|ELECTRIC MOTOR|SHOCK ABSORBER|GRINDING WHELL|PANEL|PIPE|CABLE|
