The TC920V Tension Controller can be used with a wide range of web manufacturing and treatment processes to automatically control the tension of a moving web to a constant value. Digital calculation allows a wider range of functions than previous products, but the controller can still be operated in the intuitive style of an analog device. This controller combines stable and precise tension control with excellent cost performance.
| Power supply voltage | 100 to 240V AC 50/60Hz | |||
|---|---|---|---|---|
| Power consumption | 300VA (Entry cuurent 60Atyp (20ms)) | |||
| Current capacity | 1.5A (200V) | |||
| Mass | 6kg | |||
| Environment | Operating ambient temperature | 0 to +50°C | ||
| Operating ambient humidity | 35 to 85%RH (no condensation) | |||
| Vibration resistance | 3.5mm, 1G, 3 to 150Hz, 3 directions (for one hour) | |||
| Power source noise | 2kV, normal mode, pulse width of common mode 50 nS, 1 uS (depends on the noise simulator) |
|||
| Operating ambient atmosphere | Place free from water droplets, inflammable gas, corrosive gas, corrosive gas, and dust | |||
| Rated tension | 10～10000N | |||
| Tension sensors that can be connected to the TC920V | MB, MG, MC, CD, MJ, CJ, TSA, and intrinsically safe TSA tension sensors. | |||
| Output | Output for measurement | Tension value voltage output (0 to 10VFS (1 mA or less)) Current output for tension value meter (0 to 1mA/FS) |
||
| External setting power supply | 0 to 10V (1 mA or less), 4 to 20mA (470Ω or less) 0 to 24V (4A or less) |
|||
| Power supply for external setting | Power supply for external setting | |||
| Contact output | Zero tension output Minimum diameter output Automatic control output |
Number of outputs, 3 (DC30V 0.2A, AC200V 0.2A) |
||
| Input | Sensor input | •MG tension sensor •MB tension sensor •MC tension sensor •CD tension sensor •MJ tension sensor •CJ tension sensor •TSA tension sensor |
||
| Analog input | •External tension setting •External manual tension setting |
A number of inputs, 2 (0 to 5V, input impedance 100kΩ） | ||
| •Analog diameter (for Taper and Start level) •New spindle deameter (for splicer) •External start level setting •External taper rate |
A number of inputs, 4 (0 to 10V, input impedance 100kΩ） | |||
| Contact input | •Automatic •Memory reset •Accelerate/decelerate •Splice •Output on •Emergency stop, external automatic / manual or accelerate •Diameter calculation reset •Diameter calculation hold |
A number of inputs, 8 (12V DC, 12mA) | ||
| Pulse generator Gate generator | Detection for speed and diameter | 12V DC | ||
Untuk Permintaan Penawaran Harga & Stock Silahkan Hubungi Team'S Sales kami Dibawah ini :
Marketing :
1. Yadi.
Mobile : + 62-81297691617
Phone : 021 – 80808849 Ext.208
2. Ahmad Sudarman.
Mobile : + 62-81282819147
Phone : 021 – 80808849 Ext.209
PT. TOTAL ABADI SOLUSINDO
Authorized Distributor & Energy Management Contractor
Jl.Dr.Krt Radjiman Widyodiningrat Ruko D'Arcade Blok A19
D’Mansion Jatinegara Indah Central Bussiness Park, Pulo Jahe, Cakung , Jakarta Timur 13930
Phone : +62-21-80808849 |Fax. +62-21-80808848
Email : [email protected]
Email : [email protected]
Web : www.totalabadisolusindo.com
SUPPORT ALL BRAND & ALL MANUFACTURE :
|INVERTER|PLC|HMI|SOFT STARTER|AC SERVO|SENSOR & CONTROLLER|POWER SUPPLY|CIRCUIT BREAKER & CONNECTOR|TACHOMETER|FILTER|BATTERY CHARGER|
|ENCODER & COUNTER|SCALE & INDICATOR||FLOW METER|TESTER|WATER METER|SIGNAL LAMP|SAFETY RELAY|LOADCELL|FAN & BLOWER|INSTRUMENTS|GENSET|
|MODULE|VALVE|PUMP|PNEUMATIC & HYDRAULIC|PRESSURE TRANSMITTER|CLUTCH & BRAKE|ELECTRIC MOTOR|SHOCK ABSORBER|GRINDING WHELL|PANEL|PIPE|CABLE|
